BTQTH - RED DYE DONUTS

  • MSDS: BTQTH
  • Manufacturer: FORMULABS INC
  • Product Name: RED DYE DONUTS
  • National Stock Number: 7510-00N047259
Product Identification

Product ID:RED DYE DONUTS
MSDS Date:01/02/1991
FSC:7510
NIIN:00N047259
MSDS Number: BTQTH

Responsible Party
FORMULABS INC
9676 N LOONEY RD
PIQUA, OH 45356
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 513-773-0600

Cage: FO230

Contractor
FORMULABS INC
1056 ESCONDIDO, CA 92025-4037 US

Telephone: 619-741-2345

Cage: FO230

Ingredients

(ORAL,RAT)33.75 G/KG

CAS: 25322-68-3

RTECS: TQ3500000

Fraction By Weight: 60-100%

OSHA PEL N/K

ACGIH TLV: N/K


AMMONIUM,

CAS: 81-88-9

RTECS: BP3675000

Fraction By Weight: 15-40%

OSHA PEL N/K

ACGIH TLV: N/K


(ORAL,RAT)887 MG/KG

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN:WILL TEMPORARILY COLOR
SKIN. SKIN ABSORP: NO HARMFUL EFTS EXPECTED. EYE: MAY CAUSE SLIGHT
IRRIT. INGEST: MAY CAUSE URINE TO HAVE A REDDISH COLOR UNTIL ALL
DYE HAS BEEN REMOVED FROM SYS. CH RONIC: PRLNGD/RPTD OVEREXPOSURE
MAY RESULT IN DELAYED KIDNEY DAMAGE. BASIC VIOLET 10 HAS BEEN SHOWN
TO (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INDUCE MUTATIONS IN LAB ANIMALS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH THORO W/LOW PRESS FOR @ LST 15 MIN. GET MED ATTN.
SKIN:WASH THORO W/SOAP & WATER. INHAL:MOVE TO FRESH AIR &
ADMINISTER OXYGEN IF NEEDED. SEEK MED ATTN IF VICTIM HAS DFCLTY
BRTHG. INGEST: IMM ED INDUCE VOMIT BY GIVING 2 GLASSES OF WATER &
INDUCE VOMIT BY GIVING 2 GLASSES OF WATER & STICKING A FINGER DOWN
THROAT. GET IMMED MED ATTN. DO NOT GIVE ANYTHING BY MOUTH TO AN
UNCON/CONVULS PERSON.

Fire Fighting

Flash Point Method:PMCC
Flash Point:505F,263C
Extinguishing Media:WATER SPRAY, ALCOHOL FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .

Accidental Release

Spill Release Procedures:SWEEP UP MATERIAL (AVOID CREATING A DUST) AND
PUT INTO APPROVED WASTE CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN ORIGINAL CONTAINER AWAY FROM
EXCESSIVE HEAT/OPEN FLAME.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST MASK TO AVOID
INHALATION OF DUSTS.
Ventilation:GENERAL ROOM VENTILATION.
Protective Gloves:RUBBER.
Eye Protection:ANSI APPRVD CHEM SFTY GOGGLES.
Other Protective Equipment:HAVE ACCESS TO AN ANSI APPRVD EYEWASH.
PROTECTIVE CLOTHING WHERE SKIN CONTACT IS UNAVOIDABLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Solubility in Water:APPRECIABLE
Appearance and Odor:RED, ODORLESS CYLINDER

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PROD DEGRADES SLOWLY WHEN TEMP IN
PRESENCE OF AIR & MAY LIBERATE CARBON MONOXIDE AND CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF WASTE I/A/W FEDERAL, STATE, AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.